Closed loop controller

Please select outlet connection, fitting and size.

*Notes: Pumps with SP2, SP3, or SP5 pressure switch stroke detection come without shuttle valve.

Pump operation in timer mode requires end-of-stroke detection (pressure switch) to prevent over-stroking. Operating pumps in timer mode without end-of-stroke detection voids the pump warranty. Do not use fiber optic stroke detection in applications over 130°C

*Notes: Fiber optics are required for operation. Standard configuration comes dual-probe WITHOUT fibers. Please see stroke detect option for fiber optic cables.

Pump operation in timer mode requires end-of-stroke detection (fiber-optic stoke detection) to prevent over-stroking. Operating pump in timer mode without end-of-stroke detection voids pump warranty.

Pump requires use of the included White Knight quick exhaust valves (QEVs) or QEVs supplied by the customer used with the optional NPT adapter. Operating pump without QEVs voids pump warranty.

*Notes: Proximity switch required for operation. Standard configuration comes WITHOUT proximity switch. Please see stroke detection options to order proximity switch.

Pump operation in timer mode requires end-of-stroke detection (pressure switch stoke detection) to prevent over-stroking. Operating pump in timer mode without end-of-stroke detection voids pump warranty.

Contact White Knight for copy exact code activation information.

Notes: All pump bodies are polypropylene (PP). Liquid fitting size matches orifice size. Thread on exhaust kit matches liquid connection.

Notes: Default/1A Port options define all ports unless different port fittings are selected.

Standard communication is Serial RS422. Option H1 is only available with E3 or E4 Turck connector Electrical Connection. Option H2 only available with E4.

Notes: CPA includes two liquid fittings and one drain/vent fitting. If liquid or drain/vent fitting styles or sizes are different please define the first fitting, and repeat fitting style and size for any fittings that are different from the previous call out. All fittings will be the same as the last fitting style and size defined.

Note: Flow through is 1/8-in. smaller than fitting size.

Notes: If Housing Bowl Fitting styles or sizes are different from Manifold Drain/Vent Fittings, please define the Manifold Drain/Vent Style and Size first (7-8) and use section below to define the Housing Bowl Fittings (9-10). All Housing Bowl fittings will be the same as Manifold Drain/Vent unless otherwise specified.

Different Outlet Fittings

Please select outlet fitting and size.

*Notes: DBA and DBH top-mount dampeners are only compatible with A, H & R pumps and Legacy AP and X pumps.

Configuration:

Optional Catcher Wrench: 12100-PV-0029

Notes: Filters require a fitting to connect to pump or line. The Blank option is not NPT or any other standard.